Advanced UT
Phased Array Inspection

BISCO has Omni scan with phased array module for inspecting the cross country pipelines. This is the instrument from Olympus NDT, Canada. This Omni scan was well supported by Tom view software for offline analysis.

Time-of-Flight Diffraction (TFOD)

BISCO uses Omniscan from Olympus, Canada to carry out this effective technique. Omni Scan UT allows inspections simultaneously combining TOFD with conventional pulse echo. Pulse echo complements TOFD and covers the dead zones.

Pipe line Automated UT (AUT)

BISCO have weldstar equipments of GE inspection technologies which is a most advanced automated ultrasonic girth weld inspection system using phased array technology for cross country oil & gas transmission pipeline projects. Pipes are girth-welded on site, typically using automated welding. Then, they are rapidly inspected, coated, and buried. Due to the demanding construction cycle, it is important that any defect in the welds be detected and analyzed very quickly.

Omni Scan 2-channel UT B-Scan for Corrosion Mapping

BISCO, a leader in nondestructive testing technologies, is providing the Omni Scan® channel Ultrasound B-Scan for Corrosion Mapping -the newest Omni Scan-based NDT solution from Olympus NDT, Canada. This kit includes the OmniScan MX UT instrument, the manual Remote Scan B-scan position encoder, TomoView Lite software, and a dual-UT.

Positive material identification (PMI)

A state of the art portable X-ray Fluorescence Spectrometer which uses an X-ray tube Instead of a radioactive source, and provides much quicker analysis times.
BISCO utilize this type of equipment in the petro chemical and power industries, however it could be used in all applications where a client may need to find what material is being bought as crosscheck to the mill certificates.

Long Range Ultrasonic Testing (LRUT)

Long range ultrasonic testing is a rapid way of screening for corrosion in pipelines. The method enables screening of up to 100 meters of pipeline in one test, i.e. 50 meters in both directions.
By fitting a ring of transducers around the pipeline, a wave maker device directs low frequency (20-100 kHz) ultrasonic waves via the transducers, longitudinally into the pipeline wall. The method effectively detects changes in the pipeline’s cross-section, enabling it to identify corrosion and other abnormalities. At the same time this provides the possibility of using welds and flanges as distance references.

Pipe inspection using MFL

BISCO has silverwing’s pipe scan equipment for magnetic flux leakage testing on pipes. The latest magnetic material coupled with unique mechanical designs enables coverage of all pipe diameters from 50mm to 2.4 meters with a limited number of scanning heads. Magnetic flux leakage inspection is not affected by product flowing through the pipe so surveys can be carried out both on-line and off-line and at surface temperatures up to 90°C.

Boroscopic Inspection

Bisco Offers Boroscopy to visually inspect hard reach zones to find surface defects, general condition, degradation, blockages & foreign materials in Electrical generators & transformers , Boilers, pressure vessels, pipelines ,Gas , stem & wind turbines , condenser tubes , drums , pumps, heat exchangers & various plant components without teardown. They can be used to check pitting, cracks, corrosions, erosions, weld defects & other problems quickly & easily.